Knowledge Base

How to Run the INS GUI Software on Linux

Posted by Inertial Labs on Jan 25, 2021 5:15:17 PM

Purpose: To understand how to run the INS GUI software on Linux.

Last Updated: January 2021

Note: These instructions are only for the users using the INS GUI on Linux, not the regular INS GUI on Windows.

1 Comment Click here to read/write comments

Topics: INS, Software, Linux, COM, GUI

Support Thread: The Window of the GUI is Smaller than Normal?

Posted by Luke Wilson on Aug 20, 2020 1:25:19 PM

Purpose: To provide a solution to bug that makes the toolbar containing icons smaller than it is supposed to be.

Last Updated: July 2020

When using the IMU GUI, it is possible that your window may appear as below. Note how the icon toolbar at the top is much smaller than it typically appears. The difference in the two windows can be seen in the image below.

0 Comments Click here to read/write comments

Topics: IMU, Windows, GUI, Sizing, Icon, Small

Configuring the INS to Output Data After Power is On (Auto-Start)

Posted by Luke Wilson on Aug 20, 2020 11:03:57 AM

Purpose: To understand how to configure the INS to start outputting data after power is on without any command from the host computer.

Last Updated: June 2020

There are two different auto start options in the Graphic User Interface (GUI). The first one gives the ability for the GUI to accept data from the INS when it is in auto start mode. This setting should only be used if the user plans on using the device in the GUI.

0 Comments Click here to read/write comments

Topics: INS, Data, GUI, Auto, Auto-Start, Output, Power, Automatic

Inertial Labs Knowledge Base

Topics

Need More Help?

How to Run the INS GUI Software on Linux

Support Thread: The Window of the GUI is Smaller than Normal?

Configuring the INS to Output Data After Power is On (Auto-Start)

Most Popular Resources

Knowledge Base Documents