Purpose: To understand how to find your current firmware version and update the firmware to the latest firmware version (if needed).
Last Updated: May 2021
Periodically, the Inertial Labs support team will send out new firmware updates.
To see your current firmware version, look in the upper right portion of the interface if you are on desktop like shown below.
Last Updated: July 2019
Preface:
This document describes the steps of the firmware update procedure for the Inertial Labs GPS-Aided Inertial Navigation Systems (INS), Motion Reference Units (MRU), and Attitude and Heading Reference Systems (AHRS) with embedded DGPS receivers. It holds for all members of the INS family – INS-B, INS-P, INS-PD, the MRU family – MRU-B, MRU-E, MRU-P, and MRU-PD, as well as the AHRS products.
Topics: MRU, AHRS, INS, INS-D, INS-DL, INS-B, AHRS-II, update, Guide, Firmware
IMU-P Firmware Update Manual
Last Updated: July 2019
Preface.
This manual describes the procedure of updating the firmware of Inertial Labs IMU-P devices. The procedure differs depending on the serial number of IMU-P. For devices with serial numbers I1710011 and lower – please refer to the clause #2, for devices with serial numbers I1710012 and higher – please refer to the clause #1.
Purpose: Steps that should be performed in order to upgrade a NovAtel receiver model.
Step 1.
Please provide Inertial Labs Customer Service (email to support@inertiallabs.com) with serial number of the receiver that needs the upgrade and desired model (or desired features).
