Inertial Labs Knowledge Base


      Topics

      See all

      INS, MRU, AHRS-II Firmware Update Guide

      Posted by Will Dillingham on Aug 18, 2020 4:43:32 PM

      Last Updated: July 2019

      Preface:
      This document describes the steps of the firmware update procedure for the Inertial Labs GPS-Aided Inertial Navigation Systems (INS), Motion Reference Units (MRU), and Attitude and Heading Reference Systems (AHRS) with embedded DGPS receivers. It holds for all members of the INS family – INS-B, INS-P, INS-PD, the MRU family – MRU-B, MRU-E, MRU-P, and MRU-PD, as well as the AHRS products.

      Read More

      Topics: MRU, AHRS, INS, INS-D, INS-DL, INS-B, AHRS-II, update, Guide, Firmware

      IMU-P Firmware Update Manual

      Posted by Will Dillingham on Aug 18, 2020 3:00:13 PM

      IMU-P Firmware Update Manual

      Last Updated: July 2019

      Preface.

      This manual describes the procedure of updating the firmware of Inertial Labs IMU-P devices. The procedure differs depending on the serial number of IMU-P. For devices with serial numbers I1710011 and lower – please refer to the clause #2, for devices with serial numbers I1710012 and higher – please refer to the clause #1.

      Read More

      Topics: update, IMU-P, Firmware, Manual

      Most Popular Resources


      Knowledge Base Documents