Inertial Labs Knowledge Base


      Topics

      See all

      IMU-P Firmware Update Manual

      Posted by Will Dillingham on Aug 18, 2020 3:00:13 PM

      IMU-P Firmware Update Manual

      Last Updated: July 2019

      Preface.

      This manual describes the procedure of updating the firmware of Inertial Labs IMU-P devices. The procedure differs depending on the serial number of IMU-P. For devices with serial numbers I1710011 and lower – please refer to the clause #2, for devices with serial numbers I1710012 and higher – please refer to the clause #1.

      Read More

      Topics: update, IMU-P, Firmware, Manual

      Most Popular Resources


      Knowledge Base Documents