Press Release: The All New and ULTRA Low-Cost, U-Blox Based, Single Antenna GPS-Aided Inertial Navigation System, INS-BU.

Posted by Will Dillingham on Sep 13, 2021 8:00:00 AM

Inertial Labs Lowest Cost Multi-Frequency and Multi-Constellation Solution Yet.

The new INS-BU delivers high accuracy RTK position for Air, Land, and Marine Applications.

Paeonian Springs, VA: The new INS-BU is a high performance strapdown system that determines position, velocity, and absolute orientation to any platform that it is mounted to. It utilizes a cost-effective, single antenna U-Blox GNSS receiver that provides 1 cm RTK position from RTCM3 RTK corrections and supports a wide range of GNSS constellations. Unlike other solutions available, the INS-BU comes right off the shelf with full access to all major constellations and frequencies: GPS L1/L2, GLO L1/L2, GAL E1/E5, BDS B1/B2, and QZSS L1/L2. Designed for UAVs, Land Vehicles, and Marine Vessels, the INS-BU is an effective, low-cost solution that uses a range of aiding data for different applications. With highly accurate navigation in GNSS-denied environments (utilizing the enhanced Tunnel Guide algorithm), the INS-BU delivers a comprehensive GNSS-denied solution at a price point that is unmatched.

Read More

Topics: Press Release, INS, PNT, Ublox

Press Release: Bentech Computer & Systems Corp Becomes Inertial Labs' Sensor Technology Distributor in Taiwan

Posted by Inertial Labs on Apr 23, 2021 9:00:00 AM

Introducing Bentech Computer & Systems Corp

Bentech Computer & Systems Corp. is a leading technology distributor focusing on electronic components, rugged computers, special interface cards, sensors, and power converters in Taiwan. Bentech Computer & Systems Corp is the of Inertial Labs’ positioning, orientation, and navigation technologies in Taiwan.

Paeonian Springs, VA: A new partnership between Bentech Computer & Systems Corp and Inertial Labs signifies that Bentech Computer & Systems Corp will be adding Inertial Labs’ positioning, orientation, and navigation products to their impressive list of electronic services and products. With a continued emphasis on quality, Inertial Labs strives to provide the most accurate, low-power solutions, while focusing on maintaining the best price-performance ratio possible. With 30 years of experience in servicing prominent commercial, government, transport, and security industries, Bentech Computer & Systems Corp. is an asset to the Inertial Labs’ distribution network.

Read More

Topics: Press Release, INS, PNT

Product Release: INS-U - GPS-Aided Inertial Navigation System

Posted by Inertial Labs on Mar 30, 2021 3:42:34 PM
Inertial Labs Releases the INS-U, a Low-Cost, U-Blox Based GPS-Aided Inertial Navigation System with Air Data Computer (ADC) Output Signal
The new INS-U a fully integrated INS, Attitude & Heading Reference System (AHRS), Inertial Measurement Unit (IMU), and ADC high performance strapdown system that determines position, navigation, and timing (PNT) information for any device on which it is mounted.

Paeonian Springs, VA: Part of Inertial Labs’ new generation of GPS-Aided INS solutions, the INS-U utilizes a single antenna, multi-constellation U-Blox GNSS receiver. With access to GPS, GLONASS, Galileo, QZSS, and BeiDou, the INS-U can be used in a variety of GPS-enabled environments and is protected against spoofing and jamming. Additionally, the INS-U is comprised of two barometers, a miniature gyro-compensated fluxgate compass, and tri-axis temperature calibrated advanced MEMS accelerometers and gyroscopes. These high-performance sensors, along with Inertial Labs’ new on-board sensor fusion filter, state of the art guidance and navigation algorithms, provide accurate position, velocity, and orientation of the device under measure.

Read More

Topics: GPS-Aided Navigation, UAV, Product Release, INS, INS-U

Product Release: INS-DH-OEM - Dual Antenna, GPS-Aided Inertial Navigation System

Posted by Inertial Labs on Mar 24, 2021 11:16:38 AM
The New INS-DH-OEM Seamlessly Integrates the Honeywell HG4930 Inertial Measurement Unit (IMU) into a GPS-Aided Inertial Navigation System (INS) to Provide High-Accuracy Orientation, Position, Velocity, and Timing (OPVT) for Land and Aerial Systems

The newly released INS-DH-OEM is a high-accuracy INS designed for easy integration into custom enclosures and higher order integrated system applications.

Paeonian Springs, VA: The latest addition to Inertial Labs’ expansive line of INS solutions, the INS-DH-OEM, is a great example of a case in which combining the performance of the Honeywell HG4930 and Inertial Labs’ sensor fusion expertise can be a perfect fit for certain applications. Consisting of 3 axes each of high-precision accelerometers and gyroscopes, the accuracy of the HG4930 plays a key role in the exceptional performance of the INS-DH-OEM. With input from the IMU, the INS-DH-OEM can boast a pitch and roll accuracy of 0.015 degrees RMS for dynamic applications, and a pitch and roll accuracy of 0.01 degrees for motionless applications. Inertial Labs is excited to debut the proven, rugged, and reliable HG4930 in our line of high-performing INS solutions.

 

Read More

Topics: GPS Denied Navigation, Product Release, INS, INS-DH-OEM, Honeywell HG4930, NovAtel OEM 7720

Product Release: IMU-NAV-100 - High Performance MEMS Inertial Measurement Unit

Posted by Inertial Labs on Mar 11, 2021 6:16:53 PM
The New IMU-NAV-100 is Inertial Labs' Most Accurate IMU for Measuring Angular Rates and Accelerations for Motionless and Dynamic Applications

The all-new IMU-NAV-100 is a tactical grade Inertial Measurement Unit that is easy to use in a wide range of higher order integrated system applications.

Paeonian Springs, VA: The newest addition to the Inertial Labs Advanced MEMS sensor-based family, the IMU-NAV-100, is now the best performing IMU that Inertial Labs offers. The IMU-NAV-100 is a fully integrated inertial solution that measures linear accelerations, angular rates, and Pitch & Roll with high accuracy utilizing three-axis high-grade MEMS accelerometers and three-axis tactical grade MEMS gyroscopes. The IMU-NAV-100 features Continuous Built-in Test (BIT), configurable communications protocols, electromagnetic interference (EMI) protection, and flexible input power requirements which allow it to be easily integrated in a variety of higher order systems.

Read More

Topics: Stabilization, Navigation, Product Release, IMU, IMU-NAV-100

Press Release: Low-Cost LiDAR Payload Utilizes Inertial Labs INS-D-OEM

Posted by Inertial Labs on Mar 1, 2021 9:25:46 AM

Introducing the ROCK R2A

A lightweight and compact payload, the ROCK R2A featuring the Inertial Labs INS-D-OEM is a cost-efficient and accurate solution for powerline inspection.

Paeonian Springs VA: With a wide breadth of drone inspection and mapping knowledge and a dedicated team of engineers, ROCK Robotic has burst on the scene with the ROCK R1A LiDAR and photogrammetry payload. ROCK Robotic has just recently finished development for their newest payload, the ROCK R2A. Featuring the Livox Avia LiDAR scanner mounted onto a lighter aluminum enclosure, the R2A is light enough to fly on the DJI Matrice 200 and 210 Series (versions 1 and 2), Matrice 300 RTK, the Matrice 600 Pro, the Freefly Alta X and many other custom platforms.  

Read More

Topics: Remote Sensing, Press Release, LiDAR, INS-D, Powerline Inspection

Press Release: CSE Crosscom Becomes Australian Distributor for Inertial Labs' Marine Technologies

Posted by Luke Wilson on Feb 15, 2021 2:12:25 PM

Introducing CSE Crosscom

Australia's leading commercial communications provider, CSE Crosscom, is the Australian distributor of Inertial Labs' marine positioning, orientation, and navigation technologies.

Paeonian Springs, VA: A new partnership between CSE Crosscom and Inertial Labs means that CSE Crosscom will be adding Inertial Labs’ positioning, orientation, and navigation products to their impressive list of telecommunications services and products. With a continued emphasis on quality, Inertial Labs strives to provide the most accurate, low-power solutions, while focusing on maintaining the best price-performance ratio possible. With a great deal of experience in servicing prominent commercial, government, transport, and security industries, CSE Crosscom is an asset to Inertial Labs’ distribution network.

Read More

Topics: Press Release, MRU, WS

Press Release: Inertial Labs and ABB Announce Integration of Inertial Labs' MRU with ABB ACS880 Winch Drives

Posted by Inertial Labs on Feb 8, 2021 3:57:42 PM
Inertial Labs Motion Reference Unit (MRU) is now fully integrated with ABB ACS880 winch drives for Offshore AHC and Towing Roll Compensation

Inertial Labs, one of the most advanced motion sensors manufacturer, continues to diversify its MRU range by integrating MODBUS TCP protocol as a standard to
communicate with ABB ACS880 winch drive

Benefit

ABB ACS880 winch drives for offshore applications now offer embedded software for applications involving Active Heave Compensation (AHC) and Roll Compensation in Towing. This eliminates the need for costly external third-party controllers and reduces wiring time and cost. Inertial Labs MRUs were selected as partners by ABB for offshore applications use for their innovation, R&D and support. Their Graphical User Interface (GUI) is user-friendly to efficiently configure the MRU, which offers superior performance for standard and customized applications. The combination of ABB ACS880 winch drives with Inertial Labs MRU enables ease of integration and requires no engineering time to develop communications allowing the user to concentrate on the application itself.

Read More

Topics: Press Release, MRU

Product Release: RESEPI with Avia - Remote Sensing Payload Integrated with Livox Avia LiDAR

Posted by Inertial Labs on Jan 8, 2021 3:56:37 PM
The Inertial Labs RESEPI Can Now Be Integrated with the Newly Released Livox Avia LiDAR Scanner

This new integration of RESEPI features a compact and lightweight payload ideal for mapping, powerline survey, and more.

Paeonian Springs, VA: The Remote Sensing Payload Instrument, RESEPI, consists of a dual antenna GNSS-aided Inertial Navigation System (INS), a datalogger, a LiDAR Scanner, an optional camera, and a communications system that allows for real time and post processed generation of point cloud solutions. The RESEPI is now available with the all-new Livox Avia, a compact and lightweight LiDAR scanner that features triple-echo and dual scanning modes. The RESEPI with the Avia is an ideal solution for topographic mapping, precision agriculture, mobile surveying, construction site inspection, and much more.

Read More

Topics: Product Release, RESEPI

Press Release: Inmatech Corporation is new Distributor for Inertial Labs Marine Technologies in Vietnam

Posted by Inertial Labs on Nov 17, 2020 9:36:06 AM

Introducing Inmatech Corporation

One of the leading distributors in the maritime industry, Inmatech Corporation is now the Vietnam Distributor of Inertial Labs' marine positioning, orientation, and navigation technologies.

Paeonian Springs, VA: Inertial Labs’ positioning, orientation, and navigation products will now be added to Inmatech’s impressive catalog of marine technologies and services. A partnership between Inertial Labs and Inmatech means that Inertial Labs’ marine solutions will be available in Vietnam. With a consistent emphasis on quality, Inertial Labs produces accurate, low power systems at a cost-efficient and value oriented price point. A leading distributor of maritime technical products and services, Inmatech Corporation is a valuable addition to the Inertial Labs family.

Read More

Topics: Press Release


Upcoming Events

Meet our team at the following events

ION JNC
June 01 – June 04, 2020 – Covington, KY/Cincinnati, OH, USA
SPAR 3D Expo & Conference
June 03 – June 05, 2020 – Chicago, IL, USA
EUROSATORY
June 08 – June 12, 2020 – Paris, France
MSPO 2020
September 08 – September 11, 2020 – Kielce, Poland
ION GNSS
September 21 – September 25, 2020 – St. Louis, MO, USA
ADAS 2020 – The Asian Defense and Security
September 23 – September 25, 2020 – Pasay, Philippines
AUSA 2020 – Annual Meeting & Exposition
October 12 – October 14, 2020 – Washington, DC, USA
Intergeo
October 13 – October 15, 2020 – Berlin, Germany
Commercial UAV Expo Europe
December 01 – December 03, 2020 – Amsterdam, The Netherlands
Oceanology International 2020
December 01 – December 03, 2020 – London, UK
Future Ground Combat Vehicles
December 03 – December 05, 2020 – Detroit, MI, USA

Subscribe Here!

Recent Posts