Inertial Labs Releases New Versions of Kernel Inertial Measurement Units (IMU)

Posted by Inertial Labs on Jun 10, 2022 3:41:16 PM

PAEONIAN SPRINGS, VA – June 10, 2022 – The Kernel-110,120, 210, 220 are a set of compact, selfcontained, strapdown industrial-grade (100-series) and tactical-grade (200-series) Inertial Measurement Units (IMU) that measure linear acceleration and angular rates with three-axis MEMS accelerometers and three-axis MEMS gyroscopes. Fully calibrated, temperature compensated, mathematically aligned to an orthogonal coordinate system, the Kernel-210 and 220 contain a 1 deg/hr bias in-run stability gyroscopes and 0.005 mg bias in-run stability accelerometers. The new Kernel 110,120 IMUs will be superseding Inertial Labs existing Kernel-100 IMU, whereas the Kernel 210,220 are a miniaturized version of the IMUP
Tactical unit.

kernal-220-in-hand-IMG_1949-800pxThe Kernel series of inertial measurement units are a fully integrated inertial solution which combines the newest MEMS sensors technology. This seamless integration allows Inertial Labs to provide an inertial system with top-of-the line performance while maintaining a
high value price point. With its compact design and low power consumption, the Kernel IMUs easily integrate in a wide range of higher order systems while consuming very little space and power.

With continuous Built-in Test (BIT), configurable communications protocols, electromagnetic interference (EMI) protection, and flexible input power requirements, the Kernel-110,120,210,220 are built to be used in a wide variety of environments and integrated system applications. Units have been thoroughly tested to perform in large variations in temperature, high vibration, and shock. Designed to be used in air, marine, and land environments, the Kernel series can be integrated into Motion Reference Units (MRU), Attitude and Heading Reference Systems (AHRS), and GPS-Aided Inertial Navigation Systems (INS). As a result, the Kernel IMUs are ideal for a wide variety of applications such as autonomous vehicles, antenna and line of sight stabilizations systems, as well as buoy or boat motion monitoring.

“The new Kernel IMUs represent the innovative approach at Inertial Labs,” said Jamie Marraccini,
President & CEO of Inertial Labs, “[the] high performance and the flexibility to integrate into different systems and applications is what we have striven to provide to our clients with the new Kernel IMU release.”


More on the Kernel-110,120: www.inertiallabs.com/kernel-datasheet
More on the Kernel-210,220: www.inertiallabs.com/kernel-2xx-datasheet

About Inertial Labs
Founded in 2001 and based in Northern Virginia, Inertial Labs is a trailblazer in navigation solutions and orientation technologies for land, air, and sea. A worldwide distributor network serves clients in the commercial/industrial and aerospace/defense applications.


For further information and specifications on the Inertial Labs products, please call +1-703-880-4222, e-mail sales@inertiallabs.com or visit us on the Web: www.inertiallabs.com

Topics: IMU, Kernel


Inertial Labs Inc.

Solutions for all PNT Applications

Established in 2001, Inertial Labs is a leader in position and orientation technologies for commercial, industrial, aerospace and defense applications. Inertial Labs has a worldwide distributor and representative network covering 20+ countries across 6 continents and a standard product line spanning from Inertial Measurement Units (IMU) to GPS-Aided Inertial Navigation Systems (INS). With application breadth on Land, Air, and Sea; Inertial Labs covers the gambit of inertial technologies and solutions.

What makes us different:

Subscribe Here!

Recent Posts