Inertial Labs, a developer of inertial navigation and measurement units, has announced the release of IMU-FI-200C High-Performance Fiber-Optic Gyroscopes (Fog) Inertial Measurement Units, a revolutionary unit due to its compact, self-contained strapdown, advanced tactical-grade Inertial Measurement Units, that measures linear accelerations and angular rates with three-axis tactical-grade, closed-loop Fiber-Optic Gyroscopes (FOG) and three-axis high-precision MEMS accelerometers in motionless and high dynamic application. Fully calibrated, temperature compensated, and mathematically aligned to an orthogonal coordinate system, the IMU contains up to 0.5 deg/hr gyroscopes and less than 2 mg bias repeatability over the operational range accelerometers with very low noise and high reliability.
PAEONIAN SPRINGS, VA – June 10, 2022 – The Kernel-110,120, 210, 220 are a set of compact, selfcontained, strapdown industrial-grade (100-series) and tactical-grade (200-series) Inertial Measurement Units (IMU) that measure linear acceleration and angular rates with three-axis MEMS accelerometers and three-axis MEMS gyroscopes. Fully calibrated, temperature compensated, mathematically aligned to an orthogonal coordinate system, the Kernel-210 and 220 contain a 1 deg/hr bias in-run stability gyroscopes and 0.005 mg bias in-run stability accelerometers. The new Kernel 110,120 IMUs will be superseding Inertial Labs existing Kernel-100 IMU, whereas the Kernel 210,220 are a miniaturized version of the IMUP
The New IMU-NAV-100 is Inertial Labs' Most Accurate IMU for Measuring Angular Rates and Accelerations for Motionless and Dynamic Applications
The all-new IMU-NAV-100 is a tactical grade Inertial Measurement Unit that is easy to use in a wide range of higher order integrated system applications.
Paeonian Springs, VA: The newest addition to the Inertial Labs Advanced MEMS sensor-based family, the IMU-NAV-100, is now the best performing IMU that Inertial Labs offers. The IMU-NAV-100 is a fully integrated inertial solution that measures linear accelerations, angular rates, and Pitch & Roll with high accuracy utilizing three-axis high-grade MEMS accelerometers and three-axis tactical grade MEMS gyroscopes. The IMU-NAV-100 features Continuous Built-in Test (BIT), configurable communications protocols, electromagnetic interference (EMI) protection, and flexible input power requirements which allow it to be easily integrated in a variety of higher order systems.
The Inertial Labs Kernel-100 Measures Linear Accelerations and Angular Rates with Low Noise and Very Good Repeatability
All new Kernel-100 is a breakthrough, fully integrated inertial solution that combines the latest MEMS sensor technologies.
Paeonian Springs, VA: The Kernel-100 is a revolutionary compact, self-contained strapdown industrial-grade inertial measurement system that measures linear acceleration and angular rates with three-axis MEMS accelerometers and three-axis MEMS gyroscopes. Fully calibrated, temperature compensated, mathematically aligned to an orthogonal coordinate system, the Kernel-100 contains up to 2 deg/hr bias in-run stability gyroscopes and 10 μg bias in-run stability accelerometers with extremely low noise and high repeatability.