Inertial Labs Media Center

Inertial Labs Media Center Back

The Remote Sensing

Payload Instrument

(RESEPI)

Inertial Labs Releases Revolutionary Complete LiDAR Remote Sensing Platform, RESEPI, as a Customizable Solution for Partners. The new RESEPI produces highly accurate colorized point clouds for inspection and mapping applications with industry-leading cost efficiency. In this video we give an overview of this new exciting product.

Company Introduction:

What is Inertial Labs

Inc.

As trailblazers in positioning and orienting technologies for 20 years, Inertial Labs creates cutting-edge inertial solutions for air, land, and sea. From commerce and industry to government, defense, and aerospace, Inertial Labs is at the forefront of developing and customizing products for exciting technologies

MRU-PD & MRU-B

for

Marine Surveying

MRU-PD and MRU-B Advantages:
➢ Fully compatible with - SBES and MBES echo sounders
➢ TSS1, NMEA 0183 data format
➢ 1 cm position, 0.05° Heading and 0.03° Pitch & Roll accuracy
➢ 5 cm / 5 % Heave accuracy

MRU for Autonomous

Underwater Vehicles

(AUV's)

MRU Advantages:
➢ Fully compatible with SBES and MBES
➢ TSS1, NMEA 0183 data format
➢ 1 cm position, 0.05° Heading and 0.03° Pitch & Roll accuracy
➢ 5 cm / 5 % Heave accuracy

GPS-Aided INS-DL for

Low Cost Precision

Agriculture

INS-DL Advantages:
➢ 1 cm position accuracy
➢ 0.05° Heading accuracy
➢ Multi constellation support GPS, GLONASS, BeiDou, Galileo
➢ 3°/hr gyroscopes based IMU
➢ Low cost
➢ Input from odometer / wheel sensor

Single Antenna GPS-

Aided INS for Loitering

Munitions

INS-P Advantages:
➢ Tactical-grade IMU, fused with Fluxgate Compass and GNSS receiver
➢ Excellent position and orientation performance in GPS-denied environment
➢ Aiding data (airspeed sensor, wind sensor, radar, optical camera)

Inertial Labs MRU

Qualification Tests for

Hydrography

Developed to meet requirements from marine and hydrographic applications, the MRU is an enhanced, high-performance strapdown Motion Sensor, that determines Pitch & Roll, Heave, Sway, Surge, Accelerations, Angular rates, Heading, Velocity and Positions for any device on which it is mounted.

GPS-Aided INS-D Key

Settings and

Parameters

The Professional Dual Antenna Inertial Navigation System (INS-D) is a complete, GPS-Aided, MEMS-based navigation and orientation system sensor for air, land and marine platforms. In this video we go through some of the key settings for getting started using the INS-D to ensure you get the best results.

Motion Reference Unit

Key Settings and

Parameters

The Professional Dual Antenna Motion Reference Unit (MRU-PD) is a MEMS-based motion reference sensor for marine vessel navigation, helideck monitoring, platform stabilization and motion compensation. In this video we go through some of the key settings for getting started using the MRU-PD.

Professional AHRS-10P

Unboxing and

Connecting

The Professional version of the Attitude and Heading Reference System (AHRS) is a top of the line Tactical Grade IMU and Inertial Labs Fluxgate Magnetic Compass. In this video we will unbox the system and show you how to set up to use the AHRS-10P if it is your first time using this system.

Introduction to the

MRU-E Graphical User

Interface

In this video, the Graphical User Interface (GUI) will be discussed and gone through using the Inertial Labs Enhanced Motion Reference Unit (MRU-E). This video is intended to be used not as a supplement but in combination with its respective documentation.

GPS-Aided INS for GPS

Denied UAV Flight

Control

INS-P Advantages:
➢ Tactical-grade IMU, fused with Fluxgate Compass and GNSS receiver
➢ Excellent position and orientation performance in GPS-denied environment
➢ Aiding data (airspeed sensor, wind sensor, radar, optical camera)
➢ MIL-STD-810G, DO-160, IL-STD-461E

INS-D & INS-DL for

Autonomous Ground

Vehicles (AGV's)

INS-D & INS-DL Advantages:
➢ Excellent performance in multi-path and GPS outage environments;
➢ Aiding data for integration with vehicle sensors (Camera, LiDAR, Radar, Doppler, Odometer/Wheel sensor)
➢ Compact size, IP-67 sealed

Single or Dual GPS-

Aided INS for

Multirotor Copter UAV

INS-D/DL-OEM Advantages:
➢ 1 cm RTK position accuracy
➢ 0.1° Heading accuracy
➢ 1 - 3°/hr gyro based IMU
➢ 0.05° Pitch & Roll accuracy
➢ High Shock and Vibration tolerance
➢ Low cost

The Kernel-100

IMU & DTS

Product Release

The Kernel-100 is Inertial Labs' newest product, it is a compact and lightweight Inertial Measurement Unit (IMU) and Digital Tilt Sensor (DTS) that contains high precision tri-axis MEMS accelerometers and tri-axis MEMS gyroscopes. The Kernel-100 is the lowest cost and highest grade MEMS IMU available from Inertial Labs.

 Professional MRU-PD

Unboxing and

Connecting

The MRU-PD is the ideal sensor solution for autonomous marine-based navigation applications and sea-based pointing systems. It is a low-cost alternative to typical FOG-based marine motion sensors. In this video we will unbox the unit and show you how to get started using it in the GUI.

GPS-Aided INS-D

Unboxing and

Connecting

Join us as we unbox the Dual Antenna Inertial Navigation System featuring a NovAtel OEM7720 Dual Antenna GNSS Receiver and Tactical Grade IMU. Additionally, see what comes in the box and learn how to simply connect it to a host computer for the first time and begin using the INS-D in the GUI.

The Professional AHRS

for Mortars Fire Control

Systems

AHRS-10P Advantages:
➢ High precision GPS-free Heading
➢ 0.05 deg Attitude accuracy
➢ 1°/hr gyroscopes based IMU
➢ Compact size, andIP-67 sealed
➢ MIL-STD-810G, DO-160, IL-STD-461E

Digital Tilt Sensors for

Wind Turbine Health

Monitoring

OS3D-FG and DTS Advantages:
➢ Compact size
➢ Low cost
➢ Vibration Compensated
➢ >1° Heading accuracy over temp. range
➢ 0.05° Pitch & Roll accuracy
➢ High Shock tolerance
➢ Custom enclosure options available

Professional IMU for

Remote Weapons

Stations

IMU-P Advantages:
➢ 6-axis solution
➢ Low cost FOG replacement
➢ Low noise, High Bandwidth, High update rate
➢ Low Bias drift, Low latency
➢ MIL-STD-810G, DO-160E
➢ Tactical and Industrial options

IMU-P Unboxing and

Connecting Tutorial

Video

The Professional version of the Inertial Labs Inertial Measurement Unit is a top of the line Tactical Grade IMU (MEMS-based gyroscopes and accelerometers). In this video we will unbox the system and show you how to get started setting up to use the IMU-P if it is your first time using this system.

Copyright © 2025 Inertial Labs - All Rights Reserved