Product Release: Kernel-100 - MEMS Inertial Measurement Unit and Digital Tilt Sensor

Posted by Will Dillingham on Oct 26, 2020 3:39:12 PM
The Inertial Labs Kernel-100 Measures Linear Accelerations and Angular Rates with Low Noise and Very Good Repeatability

All new Kernel-100 is a breakthrough, fully integrated inertial solution that combines the latest MEMS sensor technologies.

Paeonian Springs, VA: The Kernel-100 is a revolutionary compact, self-contained strapdown industrial-grade inertial measurement system that measures linear acceleration and angular rates with three-axis MEMS accelerometers and three-axis MEMS gyroscopes. Fully calibrated, temperature compensated, mathematically aligned to an orthogonal coordinate system, the Kernel-100 contains up to 2 deg/hr bias in-run stability gyroscopes and 10 μg bias in-run stability accelerometers with extremely low noise and high repeatability.

Kernel-100The Kernel-100 is a breakthrough, fully-integrated inertial solution which combines the newest MEMS sensor technologies. This seamless integration allows Inertial Labs to provide an inertial system with top-of-the line performance while maintaining a high value price point. With its compact design and low power consumption, the Kernel-100 is easy to integrate in a wide range of higher order systems while consuming very little space and power.

With continuous Built-in Test (BIT), configurable communications protocols, electromagnetic interference (EMI) protection, and flexible input power requirements, the Kernel-100 is built to be used in a wide variety of environments and integrated system applications. Built to be used in air, marine, and land environments, the Kernel-100 can be integrated into Motion Reference Units (MRU), Attitude and Heading Reference Systems (AHRS), and GPS-Aided Inertial Navigation Systems (INS). As a result, the Kernel-100 is ideal for a wide variety of applications such as autonomous vehicles, antenna and line of sight stabilizations systems, and buoy or boat motion monitoring.

Inertial Labs, already the leader in position and orientation sensor technologies, is growing its catalog of innovative solutions at the best value, smallest size, and lowest power consumption in their class. From commerce and industry to government, defense, and aerospace, Inertial Labs is at the forefront of developing and customizing products for exciting technologies, solving today’s problems, and unraveling those of tomorrow.

About Inertial Labs

Established in 2001, Inertial Labs is the leader in position and orientation technologies for both commercial/industrial and aerospace/defense applications. With a worldwide distributor & representative network covering 25+ countries across 6 continents, a standard product offering that spans from Inertial Measurement Units (IMU) up to full GPS-Aided Inertial Navigation Systems (INS), and an application breadth that covers Land, Air, and Sea; Inertial Labs covers the gambit of inertial technologies.

Inertial Labs logo LinkedIn LogoTwitter LogoFacebook Logo

For further information contact:

William Dillingham, Application Engineer
Will.Dillingham@inertiallabs.com
+1 (703) 880-4222
Inertial Labs Inc,
39959 Catoctin Ridge Street, Paeonian Springs, VA 20129
www.inertiallabs.com

Topics: Product Release, IMU, Kernel


Inertial Labs Inc.

Solutions for all PNT Applications

Established in 2001, Inertial Labs is a leader in position and orientation technologies for commercial, industrial, aerospace and defense applications. Inertial Labs has a worldwide distributor and representative network covering 20+ countries across 6 continents and a standard product line spanning from Inertial Measurement Units (IMU) to GPS-Aided Inertial Navigation Systems (INS). With application breadth on Land, Air, and Sea; Inertial Labs covers the gambit of inertial technologies and solutions.

What makes us different:

Subscribe Here!

Recent Posts