INS-DM – Brand New IP68 Super Ruggedized Dual GNSS Antenna Inertial Navigation System by Inertial Labs

The INS-DM model is the result of over 20 years of Inertial Labs’ experience in developing and supplying INS solutions to land, marine and aerial platforms around the world

Paeonian Springs, VA, USA: The Inertial Labs GPS-Aided Inertial Navigation System (INS-DM) is the latest version of Inertial Navigation System, developed by Inertial Labs.

This system, the INS-DM, is an IP68 rated version of an all-new generation of super ruggedized, shielded from the EMC/EMI, fully-integrated, combined Inertial Navigation System (INS) + Attitude & Heading Reference System (AHRS) + Air Data Computer (ADC) high-performance strapdown system, that determines position, velocity and absolute orientation (Heading, Pitch and Roll) for any device on which it is mounted. Horizontal and Vertical Position, Velocity and Orientation are determined with high accuracy for both motionless and dynamic applications.

Getting the most from your Inertial Navigation System by utilizing the Inertial Labs Gyro-Compensated Magnetic Compass contained within a lightweight OEM module.

Paeonian Springs, VA, November 16, 2021: Inertial Labs Releases INS-P-OEM – An Original Equipment Manufacturer (OEM) version of the Professional Inertial Navigation System. The INS-P-OEM is the ideal solution for integrators and engineers within the aerospace community who are looking to develop a payload where cost and performance are both drivers for customer and project success. 

Inertial Labs Releases the INS-U, a Low-Cost, U-Blox Based GPS-Aided Inertial Navigation System with Air Data Computer (ADC) Output Signal

The new INS-U a fully integrated INS, Attitude & Heading Reference System (AHRS), Inertial Measurement Unit (IMU), and ADC high performance strapdown system that determines position, navigation, and timing (PNT) information for any device on which it is mounted.

Paeonian Springs, VA: Part of Inertial Labs’ new generation of GPS-Aided INS solutions, the INS-U utilizes a single antenna, multi-constellation U-Blox GNSS receiver. With access to GPS, GLONASS, Galileo, QZSS, and BeiDou, the INS-U can be used in a variety of GPS-enabled environments and is protected against spoofing and jamming. Additionally, the INS-U is comprised of two barometers, a miniature gyro-compensated fluxgate compass, and tri-axis temperature calibrated advanced MEMS accelerometers and gyroscopes. These high-performance sensors, along with Inertial Labs’ new on-board sensor fusion filter, state of the art guidance and navigation algorithms, provide accurate position, velocity, and orientation of the device under measure.

The New INS-DH-OEM Seamlessly Integrates the Honeywell HG4930 Inertial Measurement Unit (IMU) into a GPS-Aided Inertial Navigation System (INS) to Provide High-Accuracy Orientation, Position, Velocity, and Timing (OPVT) for Land and Aerial Systems

The newly released INS-DH-OEM is a high-accuracy INS designed for easy integration into custom enclosures and higher order integrated system applications.

Paeonian Springs, VA: The latest addition to Inertial Labs’ expansive line of INS solutions, the INS-DH-OEM, is a great example of a case in which combining the performance of the Honeywell HG4930 and Inertial Labs’ sensor fusion expertise can be a perfect fit for certain applications. Consisting of 3 axes each of high-precision accelerometers and gyroscopes, the accuracy of the HG4930 plays a key role in the exceptional performance of the INS-DH-OEM. With input from the IMU, the INS-DH-OEM can boast a pitch and roll accuracy of 0.015 degrees RMS for dynamic applications, and a pitch and roll accuracy of 0.01 degrees for motionless applications. Inertial Labs is excited to debut the proven, rugged, and reliable HG4930 in our line of high-performing INS solutions.

The New IMU-NAV-100 is Inertial Labs' Most Accurate IMU for Measuring Angular Rates and Accelerations for Motionless and Dynamic Applications

The all-new IMU-NAV-100 is a tactical grade Inertial Measurement Unit that is easy to use in a wide range of higher order integrated system applications.

Paeonian Springs, VA: The newest addition to the Inertial Labs Advanced MEMS sensor-based family, the IMU-NAV-100, is now the best performing IMU that Inertial Labs offers. The IMU-NAV-100 is a fully integrated inertial solution that measures linear accelerations, angular rates, and Pitch & Roll with high accuracy utilizing three-axis high-grade MEMS accelerometers and three-axis tactical grade MEMS gyroscopes. The IMU-NAV-100 features Continuous Built-in Test (BIT), configurable communications protocols, electromagnetic interference (EMI) protection, and flexible input power requirements which allow it to be easily integrated in a variety of higher order systems.

The Inertial Labs RESEPI Can Now Be Integrated with the Newly Released Livox Avia LiDAR Scanner

This new integration of RESEPI features a compact and lightweight payload ideal for mapping, powerline survey, and more.

Paeonian Springs, VA: The Remote Sensing Payload Instrument, RESEPI, consists of a dual antenna GNSS-aided Inertial Navigation System (INS), a datalogger, a LiDAR Scanner, an optional camera, and a communications system that allows for real time and post processed generation of point cloud solutions. The RESEPI is now available with the all-new Livox Avia, a compact and lightweight LiDAR scanner that features triple-echo and dual scanning modes. The RESEPI with the Avia is an ideal solution for topographic mapping, precision agriculture, mobile surveying, construction site inspection, and much more.

Inertial Labs Releases Revolutionary Complete LiDAR Remote Sensing Platform, RESEPI, as a Customizable Solution for Partners

The new RESEPI produces highly accurate colorized point clouds for inspection and mapping applications with industry-leading cost efficiency.

Paeonian Springs, VA: The Remote Sensing Payload Instrument – RESEPI is an ultra-affordable solution for extremely accurate Remote Sensing applications. RESEPI was designed with the purpose of private-labeling, so Inertial Labs’ partners have the ability to put their branding on both the hardware and software components of the complete remote sensing solution. Inertial Labs’ optimized supply chain management and the ability to provide custom integrated solutions, gives any partner the ability to focus on their business, not their hardware or software, with a superior price to performance ratio. With these integration options, RESEPI is the perfect solution for a wide array of remote sensing projects with varying requirements.

The Inertial Labs Kernel-100 Measures Linear Accelerations and Angular Rates with Low Noise and Very Good Repeatability

All new Kernel-100 is a breakthrough, fully integrated inertial solution that combines the latest MEMS sensor technologies.

Paeonian Springs, VA: The Kernel-100 is a revolutionary compact, self-contained strapdown industrial-grade inertial measurement system that measures linear acceleration and angular rates with three-axis MEMS accelerometers and three-axis MEMS gyroscopes. Fully calibrated, temperature compensated, mathematically aligned to an orthogonal coordinate system, the Kernel-100 contains up to 2 deg/hr bias in-run stability gyroscopes and 10 μg bias in-run stability accelerometers with extremely low noise and high repeatability.

Inertial Labs Releases U-Blox Based, Low-Cost GPS-Aided Inertial Navigation System, INS-DU with Accurate Positioning and Dual Antenna Heading.

The new INS-DU delivers high accuracy RTK position for Air, Land, and Marine Applications.

Paeonian Springs, VA: The new INS-DU is a high performance strapdown system that determines position, velocity, and absolute orientation to any platform that it is mounted to. It utilizes a cost-effective, dual antenna U-Blox GNSS receiver that provides 1 cm RTK position from RTCM3 RTK corrections and supports a wide range of GNSS constellations. Designed for UAVs, Land Vehicles, and Marine Vessels, the INS-DU is an effective, low-cost solution that uses a range of aiding data for different applications. With highly accurate navigation in GNSS-denied environments, the INS-DU delivers a comprehensive GNSS-denied solution at a significantly lower price point.

The Inertial Labs Miniature Railway Motion Control Unit (RMCU) Determines Absolute Position and Parameters of Motion for Any Railway Platform

All new RMCU delivers high accuracy orientation for both motionless and dynamic applications.

Paeonian Springs, VA: The new Inertial Labs RMCU utilizes 3 axes each of precision MEMS accelerometers, miniature Fluxgate magnetometers and MEMS gyroscopes to provide accurate heading, pitch, and roll of the device under measure. Integration of the gyroscopes’ output provides high frequency, real-time measurement of the device rotation about all three rotational axes. The accelerometers and Fluxgate magnetometers measure extremely accurate absolute orientation at RMCU initial alignment as well as providing ongoing corrections to gyroscopes during operation.