Inertial Labs, a developer of inertial navigation and measurement units, has announced the release of IMU-FI-200C High-Performance Fiber-Optic Gyroscopes (Fog) Inertial Measurement Units, a revolutionary unit due to its compact, self-contained strapdown, advanced tactical-grade Inertial Measurement Units, that measures linear accelerations and angular rates with three-axis tactical-grade, closed-loop Fiber-Optic Gyroscopes (FOG) and three-axis high-precision MEMS accelerometers in motionless and high dynamic application. Fully calibrated, temperature compensated, and mathematically aligned to an orthogonal coordinate system, the IMU contains up to 0.5 deg/hr gyroscopes and less than 2 mg bias repeatability over the operational range accelerometers with very low noise and high reliability.

PAEONIAN SPRINGS, VA – June 10, 2022 – The Kernel-110,120, 210, 220 are a set of compact, selfcontained, strapdown industrial-grade (100-series) and tactical-grade (200-series) Inertial Measurement Units (IMU) that measure linear acceleration and angular rates with three-axis MEMS accelerometers and three-axis MEMS gyroscopes. Fully calibrated, temperature compensated, mathematically aligned to an orthogonal coordinate system, the Kernel-210 and 220 contain a 1 deg/hr bias in-run stability gyroscopes and 0.005 mg bias in-run stability accelerometers. The new Kernel 110,120 IMUs will be superseding Inertial Labs existing Kernel-100 IMU, whereas the Kernel 210,220 are a miniaturized version of the IMUP
Tactical unit.

INS-DM – Brand New IP68 Super Ruggedized Dual GNSS Antenna Inertial Navigation System by Inertial Labs

The INS-DM model is the result of over 20 years of Inertial Labs’ experience in developing and supplying INS solutions to land, marine and aerial platforms around the world

Paeonian Springs, VA, USA: The Inertial Labs GPS-Aided Inertial Navigation System (INS-DM) is the latest version of Inertial Navigation System, developed by Inertial Labs.

This system, the INS-DM, is an IP68 rated version of an all-new generation of super ruggedized, shielded from the EMC/EMI, fully-integrated, combined Inertial Navigation System (INS) + Attitude & Heading Reference System (AHRS) + Air Data Computer (ADC) high-performance strapdown system, that determines position, velocity and absolute orientation (Heading, Pitch and Roll) for any device on which it is mounted. Horizontal and Vertical Position, Velocity and Orientation are determined with high accuracy for both motionless and dynamic applications.

Inertial Labs continues to expand their portfolio into eastern Asia by partnering with one of the most well-known remote sensing solution and service providers in Japan.

Paeonian Springs, VA: Over the last half decade the low-cost autonomy and remote sensing industries have continued to sky-rocket paving way for a new need in the market. This need would ultimately be met by Inertial Labs’ ability to produce navigation and remote sensing payload solutions that remain un-matched in their price-to-performance ratio. In 2020, the year that was marked with many disruptions and unparalleled consequences as a result of the COVID-19 pandemic, Inertial Labs began to make pivotal and strategic relationships that would allow themselves to align perfectly with one of the most well-known remote sensing solution and service providers in Japan, FLIGHTS Inc.

Introducing Bentech Computer & Systems Corp

Bentech Computer & Systems Corp. is a leading technology distributor focusing on electronic components, rugged computers, special interface cards, sensors, and power converters in Taiwan. Bentech Computer & Systems Corp is the of Inertial Labs’ positioning, orientation, and navigation technologies in Taiwan.

Paeonian Springs, VA: A new partnership between Bentech Computer & Systems Corp and Inertial Labs signifies that Bentech Computer & Systems Corp will be adding Inertial Labs’ positioning, orientation, and navigation products to their impressive list of electronic services and products. With a continued emphasis on quality, Inertial Labs strives to provide the most accurate, low-power solutions, while focusing on maintaining the best price-performance ratio possible. With 30 years of experience in servicing prominent commercial, government, transport, and security industries, Bentech Computer & Systems Corp. is an asset to the Inertial Labs’ distribution network.

Inertial Labs Releases the INS-U, a Low-Cost, U-Blox Based GPS-Aided Inertial Navigation System with Air Data Computer (ADC) Output Signal

The new INS-U a fully integrated INS, Attitude & Heading Reference System (AHRS), Inertial Measurement Unit (IMU), and ADC high performance strapdown system that determines position, navigation, and timing (PNT) information for any device on which it is mounted.

Paeonian Springs, VA: Part of Inertial Labs’ new generation of GPS-Aided INS solutions, the INS-U utilizes a single antenna, multi-constellation U-Blox GNSS receiver. With access to GPS, GLONASS, Galileo, QZSS, and BeiDou, the INS-U can be used in a variety of GPS-enabled environments and is protected against spoofing and jamming. Additionally, the INS-U is comprised of two barometers, a miniature gyro-compensated fluxgate compass, and tri-axis temperature calibrated advanced MEMS accelerometers and gyroscopes. These high-performance sensors, along with Inertial Labs’ new on-board sensor fusion filter, state of the art guidance and navigation algorithms, provide accurate position, velocity, and orientation of the device under measure.

The New INS-DH-OEM Seamlessly Integrates the Honeywell HG4930 Inertial Measurement Unit (IMU) into a GPS-Aided Inertial Navigation System (INS) to Provide High-Accuracy Orientation, Position, Velocity, and Timing (OPVT) for Land and Aerial Systems

The newly released INS-DH-OEM is a high-accuracy INS designed for easy integration into custom enclosures and higher order integrated system applications.

Paeonian Springs, VA: The latest addition to Inertial Labs’ expansive line of INS solutions, the INS-DH-OEM, is a great example of a case in which combining the performance of the Honeywell HG4930 and Inertial Labs’ sensor fusion expertise can be a perfect fit for certain applications. Consisting of 3 axes each of high-precision accelerometers and gyroscopes, the accuracy of the HG4930 plays a key role in the exceptional performance of the INS-DH-OEM. With input from the IMU, the INS-DH-OEM can boast a pitch and roll accuracy of 0.015 degrees RMS for dynamic applications, and a pitch and roll accuracy of 0.01 degrees for motionless applications. Inertial Labs is excited to debut the proven, rugged, and reliable HG4930 in our line of high-performing INS solutions.

The New IMU-NAV-100 is Inertial Labs' Most Accurate IMU for Measuring Angular Rates and Accelerations for Motionless and Dynamic Applications

The all-new IMU-NAV-100 is a tactical grade Inertial Measurement Unit that is easy to use in a wide range of higher order integrated system applications.

Paeonian Springs, VA: The newest addition to the Inertial Labs Advanced MEMS sensor-based family, the IMU-NAV-100, is now the best performing IMU that Inertial Labs offers. The IMU-NAV-100 is a fully integrated inertial solution that measures linear accelerations, angular rates, and Pitch & Roll with high accuracy utilizing three-axis high-grade MEMS accelerometers and three-axis tactical grade MEMS gyroscopes. The IMU-NAV-100 features Continuous Built-in Test (BIT), configurable communications protocols, electromagnetic interference (EMI) protection, and flexible input power requirements which allow it to be easily integrated in a variety of higher order systems.

Introducing the ROCK R2A

A lightweight and compact payload, the ROCK R2A featuring the Inertial Labs INS-D-OEM is a cost-efficient and accurate solution for powerline inspection.

Paeonian Springs VA: With a wide breadth of drone inspection and mapping knowledge and a dedicated team of engineers, ROCK Robotic has burst on the scene with the ROCK R1A LiDAR and photogrammetry payload. ROCK Robotic has just recently finished development for their newest payload, the ROCK R2A. Featuring the Livox Avia LiDAR scanner mounted onto a lighter aluminum enclosure, the R2A is light enough to fly on the DJI Matrice 200 and 210 Series (versions 1 and 2), Matrice 300 RTK, the Matrice 600 Pro, the Freefly Alta X and many other custom platforms.  

Inertial Labs Motion Reference Unit (MRU) is now fully integrated with ABB ACS880 winch drives for Offshore AHC and Towing Roll Compensation

Inertial Labs, one of the most advanced motion sensors manufacturer, continues to diversify its MRU range by integrating MODBUS TCP protocol as a standard to
communicate with ABB ACS880 winch drive

Benefit

ABB ACS880 winch drives for offshore applications now offer embedded software for applications involving Active Heave Compensation (AHC) and Roll Compensation in Towing. This eliminates the need for costly external third-party controllers and reduces wiring time and cost. Inertial Labs MRUs were selected as partners by ABB for offshore applications use for their innovation, R&D and support. Their Graphical User Interface (GUI) is user-friendly to efficiently configure the MRU, which offers superior performance for standard and customized applications. The combination of ABB ACS880 winch drives with Inertial Labs MRU enables ease of integration and requires no engineering time to develop communications allowing the user to concentrate on the application itself.