Inertial Labs, Inc. and Embention Complete Full Integration of Inertial Navigation System (INS-P)
and Veronte Autopilot

Paeonian Springs, VA, November 26, 2019 – Inertial Labs Inc., developer and supplier of high-performance inertial sensors and solutions, is proud to announce the completion of a benchmark integration with Embention’s Veronte Autopilot. This release was made available on November 26, 2019, and is now available for purchase.

Since their first release in 2006, Inertial Labs Inc’s INS products, with an embedded Tactical Grade Inertial Measurement Unit have become widely used in many applications and have shown outstanding reliability and accuracy in challenging conditions such as high vibration, extreme temperatures, and tough mission profiles. With the new integration of the Embention Veronte Autopilot completed, the INS will now be fully compatible and ready for many aerial applications where autonomous unmanned flight systems are required.

The Inertial Measurement Unit component of the system is a tactical grade IMU developed by Inertial Labs, which is proven to be a perfect fit for tactical guidance, navigation, flight control, stabilization, pointing systems and other applications. With Angular Rates and Accelerations data transfer rate reaching up to 2000 Hz rate, the low power consuming IMU provides an excellent SWAP-C advantage over legacy IMUs based off tactical grade fiber-optic gyros (FOG). The on-board GNSS receiver is fully configurable to reach real-time position accuracy on one centimetre.

About Inertial Labs, Inc.

Established in 2001, Inertial Labs is a leader in position and orientation technologies for both commercial/industrial and aerospace/defence applications. With a worldwide distributor and representative network covering 20+ countries across 6 continents, and a standard product line that spans from Inertial Measurement Units (IMU) up to GPS-Aided Inertial Navigation Systems (INS) with application breadth on Land, Air, and Sea; Inertial Labs covers the gambit of inertial technologies.

For further information and specifications on the Inertial Labs GPS-Aided INS-P or IMU, MRU and AHRS, please contact Anton Barabashov at +1-703-880-4222, e-mail sales@inertiallabs.com or visit us on the Web at: www.inertiallabs.com.