Product Release: IMU-NAV-100 - High Performance MEMS Inertial Measurement Unit

The New IMU-NAV-100 is Inertial Labs' Most Accurate IMU for Measuring Angular Rates and Accelerations for Motionless and Dynamic Applications

The all-new IMU-NAV-100 is a tactical grade Inertial Measurement Unit that is easy to use in a wide range of higher order integrated system applications.

Paeonian Springs, VA: The newest addition to the Inertial Labs Advanced MEMS sensor-based family, the IMU-NAV-100, is now the best performing IMU that Inertial Labs offers. The IMU-NAV-100 is a fully integrated inertial solution that measures linear accelerations, angular rates, and Pitch & Roll with high accuracy utilizing three-axis high-grade MEMS accelerometers and three-axis tactical grade MEMS gyroscopes. The IMU-NAV-100 features Continuous Built-in Test (BIT), configurable communications protocols, electromagnetic interference (EMI) protection, and flexible input power requirements which allow it to be easily integrated in a variety of higher order systems.

The IMU-NAV-100 line of IMUs contains two different IMU options to accommodate the needs of a variety of projects. The IMU-NAV-100-S is best for projects that require high performance stabilization for antenna and line of sight stabilization systems, motion control sensors (MCS), and platform orientation and stabilization systems. With a gyroscope angular random walk of only 0.04 deg/√hr, the IMU-NAV-100-S is specialized to provide accurate data for stabilization applications. The second model is the IMU-NAV-100-A, which is best used in a variety of integrated systems such as GPS-Aided Inertial Navigation Systems (INS), Attitude and Heading Reference Systems (AHRS), and Motion Reference Units (MRU). Regardless of the application, the IMU-NAV-100 is our best performing IMU to date, providing a pitch & roll accuracy of 0.03 deg RMS.

Fully calibrated, temperature compensated, and mathematically aligned to an orthogonal coordinate system, the IMU contains up to 0.5 deg/hr bias in-run stability gyroscopes and 0.003 mg bias in-run stability accelerometers with very low noise and high reliability.

Inertial Labs, already the leader in position and orientation sensor technologies, is growing its catalog of innovative solutions at the best value, smallest size, and lowest power consumption in their class. From commerce and industry to government, defense, and aerospace, Inertial Labs is at the forefront of developing and customizing products for exciting technologies, solving today’s problems, and unraveling those of tomorrow.

About Inertial Labs

Established in 2001, Inertial Labs is the leader in position and orientation technologies for both commercial/industrial and aerospace/defense applications. With a worldwide distributor & representative network covering 25+ countries across 6 continents, a standard product offering that spans from Inertial Measurement Units (IMU) up to full GPS-Aided Inertial Navigation Systems (INS), and an application breadth that covers Land, Air, and Sea; Inertial Labs covers the gambit of inertial technologies.

For further information contact:

William Dillingham, Application Engineer
Will.Dillingham@inertiallabs.com
+1 (703) 880-4222
Inertial Labs Inc,
39959 Catoctin Ridge Street, Paeonian Springs, VA 20129
www.inertiallabs.com