This article will help you to figure out how to install the dampening system on your M300.
Components required:
There are 4 adapter bundles in the box of the damping extension:
Assembly instructions:
Step 1. Separate the standard damping from the M300 RTK
Step 2. Note the marked position of the standard damping as shown below
Step 3. Remove silicone balls from the standard damping
Step 4. Assemble the “adapter bundle 1” into the “position 1” as marked in step 2
Step 5. Assemble the “adapter bundle 2” into the “position 2” as marked in step 2
Step 6. Assemble the “adapter bundle 3” into the “position 3” as marked in step 2
Step 7. Assemble the “adapter bundle 4” into the “position 4” as marked in step 2
Step 8. Complete the damping for gPort & Pixy WS
Step 9. Mount the damping on M300 RTK and ready for use with gPort & Pixy WS
For more information, please see the damping system manufacturer's website: gremsy.com